Our Cabling Engineers Use Professional Testing Equipment for Data Cables & Fibre Optics Network Testing and Troubleshooting
Network Cable Testing
Data networks face ever increasing demands on the maximum bandwidth it can handle with VoIP telephone and IP CCTV, along with hardware upgrades and replacements. The network cabling is often overlooked. Structured Cabling that works under lower load conditions will not perform as well in a busy network and combined with age or poor standards of initial installation can result in the network slowing to a crawl.
Service Categories
- Audio Visual Installations
- Structured Cable Testing
- Comms Room Access Control
- Data Cabinet Installations
- Data Cabinet Tidy
- Data Cabling Subcontractor
- Floor Box Installations
- Fibre Optic Cabling Installations
- Fibre Optic Cable Repairs
- IP CCTV
- Office Desk Cable Management
- Data Cabling Repairs/Additions
- Structured Data Cabling
- Home Wifi
- Wifi For Businesses
Structured Cable Testing
Its almost impossible to isolate a network fault if you are not certain that the actual cabling infrastructure can handle the bandwidth.
A Mod Tap Continuity tester will only test Wire Map proving the physical connections are good it will not test these other parameters which solely or collectively will affect performance
Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)
Our trained engineers use Fluke Networks’ DSX CableAnalyzer which meets the Intertek (ETL) Certification in accordance with the IEC-61935-1 specifications for accuracy Level IV, the draft accuracy Level V and in accordance with the ANSI/TIA-1152 specifications for Level IIIe for all our Cable testing and certification work to ensure that the structured cable meets the standard for the class of cable installed
We can test and certify Copper networks up to CAT 8 as well as Multimode and Singlemode Fibre Optic cable and MPO fibre producing a set of comprehensive results based on the tests parameters described above. The results can then be compared to those supplied when the structured cabling was first installed to see if any degradation has occurred.
An effective and inexpensive way to of ensuring your data network is fault free and performing to its design.
This service is also used by Electrical Contractors and Office refurbishment companies who have used there own staff to install and terminate structured cabling but need to supply client with written proof that the installed cabling is functioning within standards.
Our Network Cable Testing Services include:
- Structured Cable testing Cat 5e, Cat 6, Cat 6A, Cat 7 ,Cat 8
- Fibre Optic Cable Testing OTDR Single Mode, Multi Mode
- Fibre Optic Cable Testing Light Loss Single Mode, Multi Mode.
- Fibre Optic testing MPO
- Structured Cabling Troubleshooting
- Network Audits
- Network Cable Testers
Need Testing For Installed Cables?
Contact Our Customer Service For Help
- Phone +64226317060
- Email: access [email protected]
- Contact Us
